Inside the cabinet

No concern about space inside the cabinet there is room enough for the hardware. Except maybe a SNK Neo Geo board, but I'll keep that board for another project.

First thing mounted is the power connector box and shortened all power cords.
For the TL behind the marguee,  for the audio setup, for the PC power adapter and one for the monitor.

The motherboard and J-Pac are mounted with some PCB mountingfeet.

equipment: AMD Sempron 3000, gigabyte motherboard from a former Packard-Bell pc.Wifi card,  Philips stereo soundsystem with subwoofer (he, why not :). DELL 17"monitor TFT and a really quiet DELL PSU from an optiplex GX280. 64mb AGP card (needed for performance! see previous blog message)

The wires on the harness are taped together. I advise you to do this or else everything gets messed up. I'll fix the rest of the wires after connecting the firebutton 4,5 and 6 to the J-PAC (since the standard jamma harness can only connect button 1,2 and 3). One of the power connectors from the PSU is used for Grounding (black), the yellow cable for 12v in the iluminated credit button and the red one is terminated. If i'm correct you can use the red cable if you have LED lights. The board is powered up by the button from the orignal casing, i'd like to change this to something accessible from outside of the cabinet. But for now it's ok this way.